W3cubDocs

/nginx

Module ngx_mail_ssl_module

The ngx_mail_ssl_module module provides the necessary support for a mail proxy server to work with the SSL/TLS protocol.

This module is not built by default, it should be enabled with the --with-mail_ssl_module configuration parameter.

This module requires the OpenSSL library.

Example Configuration

To reduce the processor load, it is recommended to

  • set the number of worker processes equal to the number of processors,
  • enable the shared session cache,
  • disable the built-in session cache,
  • and possibly increase the session lifetime (by default, 5 minutes):
worker_processes auto;

mail {

    ...

    server {
        listen              993 ssl;

        ssl_protocols       TLSv1 TLSv1.1 TLSv1.2;
        ssl_ciphers         AES128-SHA:AES256-SHA:RC4-SHA:DES-CBC3-SHA:RC4-MD5;
        ssl_certificate     /usr/local/nginx/conf/cert.pem;
        ssl_certificate_key /usr/local/nginx/conf/cert.key;
        ssl_session_cache   shared:SSL:10m;
        ssl_session_timeout 10m;

        ...
    }

Directives

Syntax: ssl on | off;
Default: ssl off;
Context: mail, server

Enables the SSL/TLS protocol for the given server.

Syntax: ssl_certificate file;
Default:
Context: mail, server

Specifies a file with the certificate in the PEM format for the given server. If intermediate certificates should be specified in addition to a primary certificate, they should be specified in the same file in the following order: the primary certificate comes first, then the intermediate certificates. A secret key in the PEM format may be placed in the same file.

Since version 1.11.0, this directive can be specified multiple times to load certificates of different types, for example, RSA and ECDSA:

server {
    listen              993 ssl;

    ssl_certificate     example.com.rsa.crt;
    ssl_certificate_key example.com.rsa.key;

    ssl_certificate     example.com.ecdsa.crt;
    ssl_certificate_key example.com.ecdsa.key;

    ...
}
Only OpenSSL 1.0.2 or higher supports separate certificate chains for different certificates. With older versions, only one certificate chain can be used.
Syntax: ssl_certificate_key file;
Default:
Context: mail, server

Specifies a file with the secret key in the PEM format for the given server.

The value engine:name:id can be specified instead of the file (1.7.9), which loads a secret key with a specified id from the OpenSSL engine name.

Syntax: ssl_ciphers ciphers;
Default: ssl_ciphers HIGH:!aNULL:!MD5;
Context: mail, server

Specifies the enabled ciphers. The ciphers are specified in the format understood by the OpenSSL library, for example:

ssl_ciphers ALL:!aNULL:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP;

The full list can be viewed using the “openssl ciphers” command.

The previous versions of nginx used different ciphers by default.
Syntax: ssl_client_certificate file;
Default:
Context: mail, server

This directive appeared in version 1.7.11.

Specifies a file with trusted CA certificates in the PEM format used to verify client certificates.

The list of certificates will be sent to clients. If this is not desired, the ssl_trusted_certificate directive can be used.

Syntax: ssl_crl file;
Default:
Context: mail, server

This directive appeared in version 1.7.11.

Specifies a file with revoked certificates (CRL) in the PEM format used to verify client certificates.

Syntax: ssl_dhparam file;
Default:
Context: mail, server

This directive appeared in version 0.7.2.

Specifies a file with DH parameters for DHE ciphers.

Syntax: ssl_ecdh_curve curve;
Default: ssl_ecdh_curve auto;
Context: mail, server

This directive appeared in versions 1.1.0 and 1.0.6.

Specifies a curve for ECDHE ciphers.

When using OpenSSL 1.0.2 or higher, it is possible to specify multiple curves (1.11.0), for example:

ssl_ecdh_curve prime256v1:secp384r1;

The special value auto (1.11.0) instructs nginx to use a list built into the OpenSSL library when using OpenSSL 1.0.2 or higher, or prime256v1 with older versions.

Prior to version 1.11.0, the prime256v1 curve was used by default.
Syntax: ssl_password_file file;
Default:
Context: mail, server

This directive appeared in version 1.7.3.

Specifies a file with passphrases for secret keys where each passphrase is specified on a separate line. Passphrases are tried in turn when loading the key.

Example:

mail {
    ssl_password_file /etc/keys/global.pass;
    ...

    server {
        server_name mail1.example.com;
        ssl_certificate_key /etc/keys/first.key;
    }

    server {
        server_name mail2.example.com;

        # named pipe can also be used instead of a file
        ssl_password_file /etc/keys/fifo;
        ssl_certificate_key /etc/keys/second.key;
    }
}
Syntax: ssl_prefer_server_ciphers on | off;
Default: ssl_prefer_server_ciphers off;
Context: mail, server

Specifies that server ciphers should be preferred over client ciphers when the SSLv3 and TLS protocols are used.

Syntax: ssl_protocols [SSLv2] [SSLv3] [TLSv1] [TLSv1.1] [TLSv1.2];
Default: ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
Context: mail, server

Enables the specified protocols. The TLSv1.1 and TLSv1.2 parameters work only when the OpenSSL library of version 1.0.1 or higher is used.

The TLSv1.1 and TLSv1.2 parameters are supported starting from versions 1.1.13 and 1.0.12 so when the OpenSSL version 1.0.1 or higher is used on older nginx versions, these protocols work, but cannot be disabled.
Syntax: ssl_session_cache off | none | [builtin[:size]] [shared:name:size];
Default: ssl_session_cache none;
Context: mail, server

Sets the types and sizes of caches that store session parameters. A cache can be of any of the following types:

off
the use of a session cache is strictly prohibited: nginx explicitly tells a client that sessions may not be reused.
none
the use of a session cache is gently disallowed: nginx tells a client that sessions may be reused, but does not actually store session parameters in the cache.
builtin
a cache built in OpenSSL; used by one worker process only. The cache size is specified in sessions. If size is not given, it is equal to 20480 sessions. Use of the built-in cache can cause memory fragmentation.
shared
a cache shared between all worker processes. The cache size is specified in bytes; one megabyte can store about 4000 sessions. Each shared cache should have an arbitrary name. A cache with the same name can be used in several servers.

Both cache types can be used simultaneously, for example:

ssl_session_cache builtin:1000 shared:SSL:10m;

but using only shared cache without the built-in cache should be more efficient.

Syntax: ssl_session_ticket_key file;
Default:
Context: mail, server

This directive appeared in version 1.5.7.

Sets a file with the secret key used to encrypt and decrypt TLS session tickets. The directive is necessary if the same key has to be shared between multiple servers. By default, a randomly generated key is used.

If several keys are specified, only the first key is used to encrypt TLS session tickets. This allows configuring key rotation, for example:

ssl_session_ticket_key current.key;
ssl_session_ticket_key previous.key;

The file must contain 80 or 48 bytes of random data and can be created using the following command:

openssl rand 80 > ticket.key

Depending on the file size either AES256 (for 80-byte keys, 1.11.8) or AES128 (for 48-byte keys) is used for encryption.

Syntax: ssl_session_tickets on | off;
Default: ssl_session_tickets on;
Context: mail, server

This directive appeared in version 1.5.9.

Enables or disables session resumption through TLS session tickets.

Syntax: ssl_session_timeout time;
Default: ssl_session_timeout 5m;
Context: mail, server

Specifies a time during which a client may reuse the session parameters.

Syntax: ssl_trusted_certificate file;
Default:
Context: mail, server

This directive appeared in version 1.7.11.

Specifies a file with trusted CA certificates in the PEM format used to verify client certificates.

In contrast to the certificate set by ssl_client_certificate, the list of these certificates will not be sent to clients.

Syntax: ssl_verify_client on | off | optional | optional_no_ca;
Default: ssl_verify_client off;
Context: mail, server

This directive appeared in version 1.7.11.

Enables verification of client certificates. The verification result is passed in the “Auth-SSL-Verify” header of the authentication request.

The optional parameter requests the client certificate and verifies it if the certificate is present.

The optional_no_ca parameter requests the client certificate but does not require it to be signed by a trusted CA certificate. This is intended for the use in cases when a service that is external to nginx performs the actual certificate verification. The contents of the certificate is accessible through requests sent to the authentication server.

Syntax: ssl_verify_depth number;
Default: ssl_verify_depth 1;
Context: mail, server

This directive appeared in version 1.7.11.

Sets the verification depth in the client certificates chain.

Syntax: starttls on | off | only;
Default: starttls off;
Context: mail, server
on
allow usage of the STLS command for the POP3 and the STARTTLS command for the IMAP and SMTP;
off
deny usage of the STLS and STARTTLS commands;
only
require preliminary TLS transition.

© 2002-2017 Igor Sysoev
© 2011-2017 Nginx, Inc.
Licensed under the BSD License.
https://nginx.org/en/docs/mail/ngx_mail_ssl_module.html