This section describes what files GHC expects to find, what files it creates, where these files are stored, and what options affect this behaviour.
Pathname conventions vary from system to system. In particular, the directory separator is “/” on Unix systems and “\” on Windows systems. In the sections that follow, we shall consistently use “/” as the directory separator; substitute this for the appropriate character for your system.
Each Haskell source module should be placed in a file on its own.
Usually, the file should be named after the module name, replacing dots in the module name by directory separators. For example, on a Unix system, the module A.B.C should be placed in the file A/B/C.hs, relative to some base directory. If the module is not going to be imported by another module (Main, for example), then you are free to use any filename for it.
GHC assumes that source files are ASCII or UTF-8 only, other encoding are not recognised. However, invalid UTF-8 sequences will be ignored in comments, so it is possible to use other encodings such as Latin-1, as long as the non-comment source code is ASCII only.
When asked to compile a source file, GHC normally generates two files: an object file, and an interface file.
The object file, which normally ends in a .o suffix, contains the compiled code for the module.
The interface file, which normally ends in a .hi suffix, contains the information that GHC needs in order to compile further modules that depend on this module. It contains things like the types of exported functions, definitions of data types, and so on. It is stored in a binary format, so don’t try to read one; use the --show-iface option instead (see Other options related to interface files).
You should think of the object file and the interface file as a pair, since the interface file is in a sense a compiler-readable description of the contents of the object file. If the interface file and object file get out of sync for any reason, then the compiler may end up making assumptions about the object file that aren’t true; trouble will almost certainly follow. For this reason, we recommend keeping object files and interface files in the same place (GHC does this by default, but it is possible to override the defaults as we’ll explain shortly).
Every module has a module name defined in its source code (module A.B.C where ...).
The name of the object file generated by GHC is derived according to the following rules, where ⟨osuf⟩ is the object-file suffix (this can be changed with the -osuf option).
-odir option (the default), then the object filename is derived from the source filename (ignoring the module name) by replacing the suffix with ⟨osuf⟩.-odir ⟨dir⟩ has been specified, then the object filename is ⟨dir⟩/⟨mod⟩.⟨osuf⟩, where ⟨mod⟩ is the module name with dots replaced by slashes. GHC will silently create the necessary directory structure underneath ⟨dir⟩, if it does not already exist.The name of the interface file is derived using the same rules, except that the suffix is ⟨hisuf⟩ (.hi by default) instead of ⟨osuf⟩, and the relevant options are -hidir and -hisuf instead of -odir and -osuf respectively.
For example, if GHC compiles the module A.B.C in the file src/A/B/C.hs, with no -odir or -hidir flags, the interface file will be put in src/A/B/C.hi and the object file in src/A/B/C.o.
For any module that is imported, GHC requires that the name of the module in the import statement exactly matches the name of the module in the interface file (or source file) found using the strategy specified in The search path. This means that for most modules, the source file name should match the module name.
However, note that it is reasonable to have a module Main in a file named foo.hs, but this only works because GHC never needs to search for the interface for module Main (because it is never imported). It is therefore possible to have several Main modules in separate source files in the same directory, and GHC will not get confused.
In batch compilation mode, the name of the object file can also be overridden using the -o option, and the name of the interface file can be specified directly using the -ohi option.
In your program, you import a module Foo by saying import Foo. In --make mode or GHCi, GHC will look for a source file for Foo and arrange to compile it first. Without --make, GHC will look for the interface file for Foo, which should have been created by an earlier compilation of Foo. GHC uses the same strategy in each of these cases for finding the appropriate file.
This strategy is as follows: GHC keeps a list of directories called the search path. For each of these directories, it tries appending ⟨basename⟩.⟨extension⟩ to the directory, and checks whether the file exists. The value of ⟨basename⟩ is the module name with dots replaced by the directory separator (“/” or “\\", depending on the system), and ⟨extension⟩ is a source extension (hs, lhs) if we are in --make mode or GHCi, or ⟨hisuf⟩ otherwise.
For example, suppose the search path contains directories d1, d2, and d3, and we are in --make mode looking for the source file for a module A.B.C. GHC will look in d1/A/B/C.hs, d1/A/B/C.lhs, d2/A/B/C.hs, and so on.
The search path by default contains a single directory: “.” (i.e. the current directory). The following options can be used to add to or change the contents of the search path:
-i⟨dir⟩[:⟨dir⟩]* This flag appends a colon-separated list of dirs to the search path.
-i resetsthe search path back to nothing. This isn’t the whole story: GHC also looks for modules in pre-compiled libraries, known as packages. See the section on packages (Packages) for details.
-o⟨file⟩ GHC’s compiled output normally goes into a .hc, .o, etc., file, depending on the last-run compilation phase. The option -o file re-directs the output of that last-run phase to ⟨file⟩.
Note
This “feature” can be counterintuitive: ghc -C -o foo.o foo.hs will put the intermediate C code in the file foo.o, name notwithstanding!
This option is most often used when creating an executable file, to set the filename of the executable. For example:
ghc -o prog --make Main
will compile the program starting with module Main and put the executable in the file prog.
Note: on Windows, if the result is an executable file, the extension “.exe” is added if the specified filename does not already have an extension. Thus
ghc -o foo Main.hs
will compile and link the module Main.hs, and put the resulting executable in foo.exe (not foo).
If you use ghc --make and you don’t use the -o, the name GHC will choose for the executable will be based on the name of the file containing the module Main. Note that with GHC the Main module doesn’t have to be put in file Main.hs. Thus both
ghc --make Prog
and
ghc --make Prog.hs
will produce Prog (or Prog.exe if you are on Windows).
-odir⟨dir⟩ Redirects object files to directory ⟨dir⟩. For example:
$ ghc -c parse/Foo.hs parse/Bar.hs gurgle/Bumble.hs -odir `uname -m`
The object files, Foo.o, Bar.o, and Bumble.o would be put into a subdirectory named after the architecture of the executing machine (x86, mips, etc).
Note that the -odir option does not affect where the interface files are put; use the -hidir option for that. In the above example, they would still be put in parse/Foo.hi, parse/Bar.hi, and gurgle/Bumble.hi.
-ohi⟨file⟩ The interface output may be directed to another file bar2/Wurble.iface with the option -ohi bar2/Wurble.iface (not recommended).
Warning
If you redirect the interface file somewhere that GHC can’t find it, then the recompilation checker may get confused (at the least, you won’t get any recompilation avoidance). We recommend using a combination of -hidir and -hisuf options instead, if possible.
To avoid generating an interface at all, you could use this option to redirect the interface into the bit bucket: -ohi /dev/null, for example.
-hidir⟨dir⟩ Redirects all generated interface files into ⟨dir⟩, instead of the default.
-stubdir⟨dir⟩ Redirects all generated FFI stub files into ⟨dir⟩. Stub files are generated when the Haskell source contains a foreign export or foreign import "&wrapper" declaration (see Using foreign export and foreign import ccall “wrapper” with GHC). The -stubdir option behaves in exactly the same way as -odir and -hidir with respect to hierarchical modules.
-dumpdir⟨dir⟩ Redirects all dump files into ⟨dir⟩. Dump files are generated when -ddump-to-file is used with other -ddump-* flags.
-outputdir⟨dir⟩ The -outputdir option is shorthand for the combination of -odir, -hidir, -stubdir and -dumpdir.
-osuf⟨suffix⟩ -hisuf⟨suffix⟩ -hcsuf⟨suffix⟩ The -osuf ⟨suffix⟩ will change the .o file suffix for object files to whatever you specify. We use this when compiling libraries, so that objects for the profiling versions of the libraries don’t clobber the normal ones.
Similarly, the -hisuf ⟨suffix⟩ will change the .hi file suffix for non-system interface files (see Other options related to interface files).
Finally, the option -hcsuf ⟨suffix⟩ will change the .hc file suffix for compiler-generated intermediate C files.
The -hisuf/-osuf game is particularly useful if you want to compile a program both with and without profiling, in the same directory. You can say:
ghc ...
to get the ordinary version, and
ghc ... -osuf prof.o -hisuf prof.hi -prof -auto-all
to get the profiled version.
The following options are useful for keeping certain intermediate files around, when normally GHC would throw these away after compilation:
-keep-hc-file -keep-hc-files Keep intermediate .hc files when doing .hs-to-.o compilations via C (Note: .hc files are only generated by unregisterised compilers).
-keep-llvm-file -keep-llvm-files | Implies: | -fllvm |
|---|
Keep intermediate .ll files when doing .hs-to-.o compilations via LLVM (Note: .ll files aren’t generated when using the native code generator, you may need to use -fllvm to force them to be produced).
-keep-s-file -keep-s-files Keep intermediate .s files.
-keep-tmp-files Instructs the GHC driver not to delete any of its temporary files, which it normally keeps in /tmp (or possibly elsewhere; see Redirecting temporary files). Running GHC with -v will show you what temporary files were generated along the way.
-tmpdir If you have trouble because of running out of space in /tmp (or wherever your installation thinks temporary files should go), you may use the -tmpdir <dir>-tmpdir <dir> option option to specify an alternate directory. For example, -tmpdir . says to put temporary files in the current working directory.
Alternatively, use your TMPDIR environment variable. Set it to the name of the directory where temporary files should be put. GCC and other programs will honour the TMPDIR variable as well.
Even better idea: Set the DEFAULT_TMPDIR make variable when building GHC, and never worry about TMPDIR again. (see the build documentation).
-ddump-hi-diffs The compiler does not overwrite an existing .hi interface file if the new one is the same as the old one; this is friendly to make. When an interface does change, it is often enlightening to be informed. The -ddump-hi-diffs option will make GHC report the differences between the old and new .hi files.
-ddump-minimal-imports Dump to the file M.imports (where ⟨M⟩ is the name of the module being compiled) a “minimal” set of import declarations. The directory where the .imports files are created can be controlled via the -dumpdir option.
You can safely replace all the import declarations in M.hs with those found in its respective .imports file. Why would you want to do that? Because the “minimal” imports (a) import everything explicitly, by name, and (b) import nothing that is not required. It can be quite painful to maintain this property by hand, so this flag is intended to reduce the labour.
--show-iface⟨file⟩ where ⟨file⟩ is the name of an interface file, dumps the contents of that interface in a human-readable format. See Modes of operation.
-fforce-recomp Turn off recompilation checking (which is on by default). Recompilation checking normally stops compilation early, leaving an existing .o file in place, if it can be determined that the module does not need to be recompiled.
In the olden days, GHC compared the newly-generated .hi file with the previous version; if they were identical, it left the old one alone and didn’t change its modification date. In consequence, importers of a module with an unchanged output .hi file were not recompiled.
This doesn’t work any more. Suppose module C imports module B, and B imports module A. So changes to module A might require module C to be recompiled, and hence when A.hi changes we should check whether C should be recompiled. However, the dependencies of C will only list B.hi, not A.hi, and some changes to A (changing the definition of a function that appears in an inlining of a function exported by B, say) may conceivably not change B.hi one jot. So now…
GHC calculates a fingerprint (in fact an MD5 hash) of each interface file, and of each declaration within the interface file. It also keeps in every interface file a list of the fingerprints of everything it used when it last compiled the file. If the source file’s modification date is earlier than the .o file’s date (i.e. the source hasn’t changed since the file was last compiled), and the recompilation checking is on, GHC will be clever. It compares the fingerprints on the things it needs this time with the fingerprints on the things it needed last time (gleaned from the interface file of the module being compiled); if they are all the same it stops compiling early in the process saying “Compilation IS NOT required”. What a beautiful sight!
You can read about how all this works in the GHC commentary.
GHC supports the compilation of mutually recursive modules. This section explains how.
Every cycle in the module import graph must be broken by a hs-boot file. Suppose that modules A.hs and B.hs are Haskell source files, thus:
module A where
import B( TB(..) )
newtype TA = MkTA Int
f :: TB -> TA
f (MkTB x) = MkTA x
module B where
import {-# SOURCE #-} A( TA(..) )
data TB = MkTB !Int
g :: TA -> TB
g (MkTA x) = MkTB x
hs-boot files importing, hi-boot files Here A imports B, but B imports A with a {-# SOURCE #-} pragma, which breaks the circular dependency. Every loop in the module import graph must be broken by a {-# SOURCE #-} import; or, equivalently, the module import graph must be acyclic if {-# SOURCE #-} imports are ignored.
For every module A.hs that is {-# SOURCE #-}-imported in this way there must exist a source file A.hs-boot. This file contains an abbreviated version of A.hs, thus:
module A where
newtype TA = MkTA Int
To compile these three files, issue the following commands:
ghc -c A.hs-boot -- Produces A.hi-boot, A.o-boot ghc -c B.hs -- Consumes A.hi-boot, produces B.hi, B.o ghc -c A.hs -- Consumes B.hi, produces A.hi, A.o ghc -o foo A.o B.o -- Linking the program
There are several points to note here:
A.hs-boot is a programmer-written source file. It must live in the same directory as its parent source file A.hs. Currently, if you use a literate source file A.lhs you must also use a literate boot file, A.lhs-boot; and vice versa. A hs-boot file is compiled by GHC, just like a hs file:
ghc -c A.hs-boot
When a hs-boot file A.hs-boot is compiled, it is checked for scope and type errors. When its parent module A.hs is compiled, the two are compared, and an error is reported if the two are inconsistent.
Just as compiling A.hs produces an interface file A.hi, and an object file A.o, so compiling A.hs-boot produces an interface file A.hi-boot, and an pseudo-object file A.o-boot:
A.o-boot is empty (don’t link it!), but it is very useful when using a Makefile, to record when the A.hi-boot was last brought up to date (see Using make).hi-boot generated by compiling a hs-boot file is in the same machine-generated binary format as any other GHC-generated interface file (e.g. B.hi). You can display its contents with ghc --show-iface. If you specify a directory for interface files, the -ohidir flag, then that affects hi-boot files too.{-# SOURCE #-} import is considered to refer to the hs-boot file, then the module import graph must have no cycles. The command ghc -M will report an error if a cycle is found. M that is {-# SOURCE #-}-imported in a program will usually also be ordinarily imported elsewhere. If not, ghc --make automatically adds M to the set of modules it tries to compile and link, to ensure that M‘s implementation is included in the final program. A hs-boot file need only contain the bare minimum of information needed to get the bootstrapping process started. For example, it doesn’t need to contain declarations for everything that module A exports, only the things required by the module(s) that import A recursively.
A hs-boot file is written in a subset of Haskell:
There must be no value declarations, but there can be type signatures for values. For example:
double :: Int -> Int
A closed type family may optionally omit its equations, as in the following example:
type family ClosedFam a where ..
The .. is meant literally – you should write two dots in your file. Note that the where clause is still necessary to distinguish closed families from open ones. If you give any equations of a closed family, you must give all of them, in the same order as they appear in the accompanying Haskell file.
A data type declaration can either be given in full, exactly as in Haskell, or it can be given abstractly, by omitting the ‘=’ sign and everything that follows. For example:
data T a b
In a source program this would declare TA to have no constructors (a GHC extension: see Data types with no constructors), but in an hi-boot file it means “I don’t know or care what the constructors are”. This is the most common form of data type declaration, because it’s easy to get right. You can also write out the constructors but, if you do so, you must write it out precisely as in its real definition.
If you do not write out the constructors, you may need to give a kind annotation (Explicitly-kinded quantification), to tell GHC the kind of the type variable, if it is not “*”. (In source files, this is worked out from the way the type variable is used in the constructors.) For example:
data R (x :: * -> *) y
You cannot use deriving on a data type declaration; write an instance declaration instead.
GHC supports the specification of module signatures, which both implementations and users can typecheck against separately. This functionality should be considered experimental for now; some details, especially for type classes and type families, may change. This system was originally described in Backpack: Retrofitting Haskell with Interfaces. Signature files are somewhat similar to hs-boot files, but have the hsig extension and behave slightly differently.
Suppose that I have modules String.hs and A.hs, thus:
module Text where
data Text = Text String
empty :: Text
empty = Text ""
toString :: Text -> String
toString (Text s) = s
module A where
import Text
z = toString empty
Presently, module A depends explicitly on a concrete implementation of Text. What if we wanted to a signature Text, so we could vary the implementation with other possibilities (e.g. packed UTF-8 encoded bytestrings)? To do this, we can write a signature TextSig.hsig, and modify A to include the signature instead:
module TextSig where
data Text
empty :: Text
toString :: Text -> String
module A where
import TextSig
z = toString empty
To compile these two files, we need to specify what module we would like to use to implement the signature. This can be done by compiling the implementation, and then using the -sig-of flag to specify the implementation backing a signature:
ghc -c Text.hs ghc -c TextSig.hsig -sig-of "TextSig is main:Text" ghc -c A.hs
To specify multiple signatures, use a comma-separated list. The -sig-of parameter is required to specify the backing implementations of all home modules, even in one-shot compilation mode. At the moment, you must specify the full module name (unit ID, colon, and then module name), although in the future we may support more user-friendly syntax.
-sig-of"⟨sig⟩ is ⟨package⟩:⟨module⟩" Specify the module to be used at the implementation for the given signature.
To just type-check an interface file, no -sig-of is necessary; instead, just pass the options -fno-code -fwrite-interface. hsig files will generate normal interface files which other files can also use to type-check against. However, at the moment, we always assume that an entity defined in a signature is a unique identifier (even though we may happen to know it is type equal with another identifier). In the future, we will support passing shaping information to the compiler in order to let it know about these type equalities.
Just like hs-boot files, when an hsig file is compiled it is checked for type consistency against the backing implementation. Signature files are also written in a subset of Haskell essentially identical to that of hs-boot files.
There is one important gotcha with the current implementation: currently, instances from backing implementations will “leak” code that uses signatures, and explicit instance declarations in signatures are forbidden. This behavior will be subject to change.
make
It is reasonably straightforward to set up a Makefile to use with GHC, assuming you name your source files the same as your modules. Thus:
HC = ghc
HC_OPTS = -cpp $(EXTRA_HC_OPTS)
SRCS = Main.lhs Foo.lhs Bar.lhs
OBJS = Main.o Foo.o Bar.o
.SUFFIXES : .o .hs .hi .lhs .hc .s
cool_pgm : $(OBJS)
rm -f $@
$(HC) -o $@ $(HC_OPTS) $(OBJS)
# Standard suffix rules
.o.hi:
@:
.lhs.o:
$(HC) -c $< $(HC_OPTS)
.hs.o:
$(HC) -c $< $(HC_OPTS)
.o-boot.hi-boot:
@:
.lhs-boot.o-boot:
$(HC) -c $< $(HC_OPTS)
.hs-boot.o-boot:
$(HC) -c $< $(HC_OPTS)
# Inter-module dependencies
Foo.o Foo.hc Foo.s : Baz.hi # Foo imports Baz
Main.o Main.hc Main.s : Foo.hi Baz.hi # Main imports Foo and Baz
Note
Sophisticated make variants may achieve some of the above more elegantly. Notably, gmake‘s pattern rules let you write the more comprehensible:
%.o : %.lhs
$(HC) -c $< $(HC_OPTS)
What we’ve shown should work with any make.
Note the cheesy .o.hi rule: It records the dependency of the interface (.hi) file on the source. The rule says a .hi file can be made from a .o file by doing…nothing. Which is true.
Note that the suffix rules are all repeated twice, once for normal Haskell source files, and once for hs-boot files (see How to compile mutually recursive modules).
Note also the inter-module dependencies at the end of the Makefile, which take the form
Foo.o Foo.hc Foo.s : Baz.hi # Foo imports Baz
They tell make that if any of Foo.o, Foo.hc or Foo.s have an earlier modification date than Baz.hi, then the out-of-date file must be brought up to date. To bring it up to date, make looks for a rule to do so; one of the preceding suffix rules does the job nicely. These dependencies can be generated automatically by ghc; see Dependency generation
Putting inter-dependencies of the form Foo.o : Bar.hi into your Makefile by hand is rather error-prone. Don’t worry, GHC has support for automatically generating the required dependencies. Add the following to your Makefile:
depend :
ghc -dep-suffix '' -M $(HC_OPTS) $(SRCS)
Now, before you start compiling, and any time you change the imports in your program, do make depend before you do make cool_pgm. The command ghc -M will append the needed dependencies to your Makefile.
In general, ghc -M Foo does the following. For each module M in the set Foo plus all its imports (transitively), it adds to the Makefile:
A line recording the dependence of the object file on the source file.
M.o : M.hs
(or M.lhs if that is the filename you used).
For each import declaration import X in M, a line recording the dependence of M on X:
M.o : X.hi
For each import declaration import {-# SOURCE #-} X in M, a line recording the dependence of M on X:
M.o : X.hi-boot
(See How to compile mutually recursive modules for details of hi-boot style interface files.)
If M imports multiple modules, then there will be multiple lines with M.o as the target.
There is no need to list all of the source files as arguments to the ghc -M command; ghc traces the dependencies, just like ghc --make (a new feature in GHC 6.4).
Note that ghc -M needs to find a source file for each module in the dependency graph, so that it can parse the import declarations and follow dependencies. Any pre-compiled modules without source files must therefore belong to a package [1].
By default, ghc -M generates all the dependencies, and then concatenates them onto the end of makefile (or Makefile if makefile doesn’t exist) bracketed by the lines “# DO NOT DELETE: Beginning of Haskell dependencies” and “# DO NOT DELETE: End of Haskell dependencies”. If these lines already exist in the makefile, then the old dependencies are deleted first.
Don’t forget to use the same -package options on the ghc -M command line as you would when compiling; this enables the dependency generator to locate any imported modules that come from packages. The package modules won’t be included in the dependencies generated, though (but see the -include-pkg-deps option below).
The dependency generation phase of GHC can take some additional options, which you may find useful. The options which affect dependency generation are:
-ddump-mod-cycles Display a list of the cycles in the module graph. This is useful when trying to eliminate such cycles.
-v2 Print a full list of the module dependencies to stdout. (This is the standard verbosity flag, so the list will also be displayed with -v3 and -v4; see Verbosity options.)
-dep-makefile⟨file⟩ Use ⟨file⟩ as the makefile, rather than makefile or Makefile. If ⟨file⟩ doesn’t exist, mkdependHS creates it. We often use -dep-makefile .depend to put the dependencies in .depend and then include the file .depend into Makefile.
-dep-suffix⟨suf⟩ Make extra dependencies that declare that files with suffix .<suf>_<osuf> depend on interface files with suffix .<suf>_hi, or (for {-# SOURCE #-} imports) on .hi-boot. Multiple -dep-suffix flags are permitted. For example, -dep-suffix a -dep-suffix b will make dependencies for .hs on .hi, .a_hs on .a_hi, and .b_hs on .b_hi. (Useful in conjunction with NoFib “ways”.)
--exclude-module=⟨file⟩ Regard <file> as “stable”; i.e., exclude it from having dependencies on it.
-include-pkg-deps Regard modules imported from packages as unstable, i.e., generate dependencies on any imported package modules (including Prelude, and all other standard Haskell libraries). Dependencies are not traced recursively into packages; dependencies are only generated for home-package modules on external-package modules directly imported by the home package module. This option is normally only used by the various system libraries.
Haskell specifies that when compiling module M, any instance declaration in any module “below” M is visible. (Module A is “below” M if A is imported directly by M, or if A is below a module that M imports directly.) In principle, GHC must therefore read the interface files of every module below M, just in case they contain an instance declaration that matters to M. This would be a disaster in practice, so GHC tries to be clever.
In particular, if an instance declaration is in the same module as the definition of any type or class mentioned in the head of the instance declaration (the part after the “=>”; see Relaxed rules for instance contexts), then GHC has to visit that interface file anyway. Example:
module A where instance C a => D (T a) where ... data T a = ...
The instance declaration is only relevant if the type T is in use, and if so, GHC will have visited A‘s interface file to find T‘s definition.
The only problem comes when a module contains an instance declaration and GHC has no other reason for visiting the module. Example:
module Orphan where instance C a => D (T a) where ... class C a where ...
Here, neither D nor T is declared in module Orphan. We call such modules “orphan modules”. GHC identifies orphan modules, and visits the interface file of every orphan module below the module being compiled. This is usually wasted work, but there is no avoiding it. You should therefore do your best to have as few orphan modules as possible.
Functional dependencies complicate matters. Suppose we have:
module B where instance E T Int where ... data T = ...
Is this an orphan module? Apparently not, because T is declared in the same module. But suppose class E had a functional dependency:
module Lib where class E x y | y -> x where ...
Then in some importing module M, the constraint (E a Int) should be “improved” by setting a = T, even though there is no explicit mention of T in M.
These considerations lead to the following definition of an orphan module:
An instance declaration in a module M is an orphan instance if orphan instance
M, andM; or there is a functional dependency for which none of the type constructors mentioned in the non-determined part of the instance head is defined in M.Only the instance head counts. In the example above, it is not good enough for C‘s declaration to be in module A; it must be the declaration of D or T.
M is an orphan rule orphan rule if none of the variables, type constructors, or classes that are free in the left hand side of the rule are declared in M. If you use the flag -Worphans, GHC will warn you if you are creating an orphan module. Like any warning, you can switch the warning off with -Wno-orphans, and -Werror will make the compilation fail if the warning is issued.
You can identify an orphan module by looking in its interface file, M.hi, using the --show-iface mode. If there is a [orphan module] on the first line, GHC considers it an orphan module.
| [1] | This is a change in behaviour relative to 6.2 and earlier. |
© 2002–2007 The University Court of the University of Glasgow. All rights reserved.
Licensed under the Glasgow Haskell Compiler License.
https://downloads.haskell.org/~ghc/8.0.1/docs/html/users_guide/separate_compilation.html